What It Means
Spa Pipe / Jet Biofilm Flush Needed
Likely Causes
- Biofilm in plumbing
- High bather load
- Long drain interval
- Sanitizer kept too low
- Foam/odor after jets run
Next Checks
- Use a spa pipe and jet purge product before draining when biofilm is suspected
- Run jets per product label, then drain and rinse thoroughly
- Clean filters separately
- Refill and balance water before sanitizer startup
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Hot Tubs / Spas or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.