What It Means
AI Vision or Mapping Misses Debris / Coverage
Likely Causes
- Camera/sensor window dirty
- Pool shape, stairs, ledges, or glare confusing route logic
- Fine debris requires ultra-fine filter panel
- Cycle mode too short for pool size
- Firmware/app route data not updated
Next Checks
- Clean optical/ultrasonic sensor windows and filter basket
- Run a full floor/wall/waterline cycle before judging coverage
- Install fine or ultra-fine filter media if available
- Remove toys, hoses, and large leaves before mapping
- Save app screenshots and pool-shape notes for support escalation
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Aiper or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.